Receiver

27833R Infra-red eye allows you to watch and control a Sky Digibox from another room the indicator light shows remote control operation. Philex Accessory Remote Eye for Sky & Freeview Remotes SLx Sky

The SLX Link works by picking up the remote control signal from your Sky remote in your bedroom via the little eye, converting the infra red pulses to electronic pulses, sending the electronic pulses down the cable to the Sky receiver.

The receiver will accept the electronic pulses only at RF out 2 and they then pass through the same circuit as the remote receiver eye that is on the front of your digibox

SLXLINK system is the easy way to distribute high quality digital pictures plus normal off air channels, the tvLINK function built within the Sky digital receiver to control the digital receiver from a different room.

• Converts the Sky I/O port to an RF output
• Can be connected to a TV distribution system to allow viewing and IR remote control from multiple locations
• Aerial loop through for Freeview signal distribution
• Fully compatible with new and existing TV distribution systems
• Allows the use of existing RF Link devices used to distribute Sky signals and control remotely Sky receivers.

• RF modulator output channels 21CH - 69CH
• RF forward frequency range 47-862MHz
• Return path frequency range 5 to 12 MHz (RF OUT to I/O port)
• RF IN connector x 1 IEC female
• RF OUT connector x 2 IEC male
• I/O connector 10 pin mini DIN plug on 250mm flylead
• DC output (RF OUT) Regulated 9VDC 100mA (short circuit protected)
• Power supply Input 100-240V~50/60Hz 0.35A
• Power supply Output 12V1000mA max.

MPEG2 SD, MPEG2 HD, H.264/AVC SD, H.264/AVC HD,MP4
SCPC and MCPC receivable from C/Ku band satellite
Automatic PAL/NTSC conversion
5000 channels TV and Radio programmable
32 different favorite groups selection
Multi-language OSD (English, French, German, Italian, Spanish,Portuguese, Russian, Turkish, Arabic, Polish etc)
Fully support to 7 days Electronic Program Guide(EPG)
Color OSD
16-bit color On Screen Display
Automatic network search for newly added transponders
DiSEqC 1.2 fully supported, 13/18V, 0/22K, LNB control
Various channel editing functions (favorite, moving, locking, renaming, deleting and sorting)
Parental control for channels
Ease to use Menu System
Software upgrades through RS232 port and Support USB upgrade
8 Timer Reservations, automatically switch to a specific channel
Subtitle support DVB EN300743 and EBU
Teletext support DVB ETS300472 by VBI and OSD
Sort Channel Channel list can be sorted by alphabetic A-Z,Scramble,Favorite,Lock,Sat
USB Disk Supports FAT16/FAT32/FAT12
Fold browser list JPEG/BMP files
HDMI Interface 480i/p, 576i/p, 720p, 1080i and 1080p
Game Games (Tetris, Othello, Sudoku.)
Record 1 stream recording or 1 stream timeshift

DESCRIPTION of Revez HDS619 FULL HD Free To Air Box

Programmed with UK free to air channel list

Perfect box to connect to a dish for Astra 28.2e and get all the UK free to air stations

Specification

DVB-S/DVB-S2 Satellite Compliant (MPEG-II/ MPEG-IV/ H.264) 
SCPC & MCPC receivable from Ku and C band satellites 
Universal, Single, Single S & C Band Wideband LNB 
Compatible Code Rates: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,7/8, 8/9 and 9/10 
DiSEq C 1.0/1.2/1.3(USALS) 
Blind search supported. 
Multi satellite search,network search, manual search 
PAL/NTSC 
Variable aspect ratio(4:3,16:9)with PAN&SCAN vector or letter box option 
Output Resolution: 480i,480p,576i,576p,720p_50Hz,720p_60Hz,1080i_50Hz,
1080i_60Hz, 1080P_50Hz, 1080P_60Hz
16bits Color on screen display (OSD) 
Storing memory: 100 satellite,2000 transponders and 4000 channels

Features
Supports satellite adding, deleting, renaming 
Supported transponder add ,delete,edit 
8 favorite group and parental lock supported
Supports programme lock,delete,move,rename. 
Supports multi-language menu (English,French,German,Italian,Spanish,Portuguese,Russian,Turkish,Polish,Arabic)
Suports list of programmes,have four sort function:FTA>CAS,satellite,transponder, alphabet. 
Multi-language audio. 
Multi-language DVB Subtitle output 
3 days Electronic Program Guide (EPG) 
Teletext output through VBI and OSD. 
Software(data,maincode) upgrade through USB 
USB 2.0 Interface 
S/PDIF Interface for digital bit stream out (AC-3) 
Timer:
Supports setting timer, you can add up 20 event timers at most. 
Timer Mode：Once/Daily/Week/Week1-5/Week6-7 
Timer Service：1. Channel: change to pre-defined channel when timer triggered 2. Record: start recording pre-defined channel when timer triggered 
Wakeup Channel：wake up pre-set channel when timer triggered 
Wakeup Message：General/Birthday/Anniversary 
Auto standby：No interaction in 3 hours -> alert message 2 minutes before enter standby -> auto enter standby if no action 
Wakeup timer：Wakeup date and time 
Duration：System enter standby after duration 
Sleep timer：1. Enter standby when timer tirggered 2. Auto enter standby in 3 hour when nothing pressed on remote
USB:(FAT12,FAT16,FAT32 and NTFS)
Rename ,delete ,create files ,Format and set recording path 
S/W download, download maincode 
Supported music files,mp3 format. 
Music player: Supported Pause, FF, FB, Jump 
Media play: Supported avi, mkv, ts, tp, trp, mpg, mp4. 
Supports video loop and FF/FB and Pause,Resume Jump,Zoom 
Supports AVI subtitle file (.srt and .sub ) 
Supports JPEG,bmp format 
USB PVR: 
USB disk speed auto detect
Record and playback stream files:Recording current channel.(FTA or scramble).
(Watching and recording)
Watching one channel (FTA/Scramble) and Recording another channel (FTA/Scramble)
in the same TP,During recording, can switch the channel in the same TP
Supports Timeshift (USB HDD / Stick required)
USB supported FAT & FAT32,NTFS

Technical Specifications:
DVB-S2 FRONT END Standards Requirement
Input Frequency: 950~2150MHz 
Input Level: -65~ -25dBm 
Input Impedance: 75Ω S
LNB Polarisation:13V/18V/OFF, Imax = 300mA 
LNB Switching: 22KHz DiSEq C 1.0/1.2/2.0 
Demodulation: QPSK ,8PSK,16APSK,32APSK 
Reed-Solomon: 204, 188, t = 8 
Roll Off Factor:0.35,0.25 
FEC :1/2, 2/3, 3/4, 5/6, 7/8, Automatic 
Symbol Rate: 2.0~45 MS/s 
DVB Standard: DVB-S2 (ETSI EN 302 307) 
DEMULTIPLEXER Standards Requirement
Standard: ISO/IEC 13818-1 S s
Input Max. Bit Stream Rate: 120Mbps(Serial)/15Mbps(Parallel) 
VIDEO Standards Requirement
Standard: ISO/IEC 13818-2 
MPEG1,MPEG-2 MP@ML,H.264, VC1, VP8,DV, DivX, and MPEG4 
Aspect Ratio: 16:9 wide screen, 4:3 letter box, 4:3 pan scan,support AFD(DTG, MingDTG) 
Video Full Resolution:1920 × 1080p and 1920 × 1080i and 1280 × 720p for HD video,720 × 480p, 720 × 480i, 720 × 576i, and 720 × 576p for SD video,
dual MPEG-1, MPEG-2 and MPEG-4 decode for SD resolution,MPEG4 AVC / H.264 and VC1 decode for dual SD and single HD up to 720p and 1080i
and 1080p
Video Format: PAL, NTSC 
Video RAM: 128 Mbyte 
Host Supplied Audio/Video: I & P frame support 
Format conversion: Pan & Scan, Letterbox 
Video planes: 2 panes (1 graphic planes, 1 display planes) 
AUDIO Standard Requirement
Standard: ISO/IEC 13818-3 
Decoding: MPEG-2 layer I and II (Musiccam),MPEG4 AAC and MPEG4 AAC-HE (AAC+)
Dolby Digital (AC-3) with bit rates up to 640 Kbits/s,LPCM up to 48 KHz,MP3.
Sampling Frequency :32, 44.1, 48KHz 
Audio Output Impedance: Low 
Output Mode: Mono/Stereo/Left/Right 
A/V OUTPUT Standards Requirement
Video De-emphasis: CCIR REC.405-1, 625 Lines 
Video Bandwidth: 5.5MHz 
Video Output Impedance: 75Ω 
Video Output Level: 1.0Vp-p 
Audio Output Frequency: 20Hz~ 20KHz 
PROCESSOR Standards Requirement
Chipset: M3510C
Flash Memory: 4MByte 
DDRII Memory: 64MB 
Tuner: AV2018 On Board 
FRONT PANEL Standards Requirement
IR Receiver: 38KHz S 
Display 4 Digit, 7 segment (Clock in standby mode) LED 
Other Supplier specific features 
REAR PANEL Standards Requirement
DVB - LNB input F-type 
HDMI output 
S/PDIF 
USB 
OTHER Standards Requirement
Power Supply :Smps,Input AC 100 ~240V, 50/60Hz
Power Consumption:Max 30W 
Ambient Operation Temperature: 0~40℃ 
Product size: 
ACCESSORIES

• Satellite Receiver HD (HDS619)
• RCU Category: IR (Carrier 38KHz)
• RCU batteries
• IR Sensor with 4 digit display
• Power Adaptor
• Manual (English)